Products

Product Description

The AIP-494 is a three gigabits level B, high definition, or standard definition serial digital interface closed caption encoder (3GB/HD/SD-SDI CC Encoder) with audio and captions over IP. It accepts 3GB/HD/SD-SDI transport streams, and gives three closed caption encoded outputs of the same format as the input, with the option of one of them being decoded. The SDI outputs are re-clocked, making the SDI output eye pattern generally better than the input. It is a better re-clocker than most re-clocking Distribution Amplifiers (DA). The unit will pass ANC data untouched including audio to the output.The AIP-494 will take the user selected channel pair of AES that is embedded on the SDI input and send that audio to a Captioner via IP. A free audio over IP player is provided to monitor the audio. The streaming audio is low latency and low bandwidth so no special Internet services are required. The unit will also receive caption data via IP from the Captioner. This allows the removal of the traditional two phone line setup without having to be connected to a captioning server. This device allows true IP captioning.

• 3GB/HD/SD-SDI
• XDS RAM (V-Chip)
• Data Recovery
• GPI Remote "Legalizer"
• 2 CEA-708 Services Converted from 608
• Field Upgradeable
• VANC Line Selection
• IP Audio with Channel Pair Selection
• IP Captioning
• Power off Bypass
• VBI and/or VANC for SD
• Decodes CC1-CC4 or S1-S6

• Connectors: One 75 Ohm BNC
• Embedded Audio: AES 48 kHz (20 or 24 bit) SMPTE ST 299-1 (HD) or SMPTE ST 272 (SD)
• SMPTE: ST 274 (1080P, 1080I, 1080S), ST 296 (720P), and ST 259 (NTSC & PAL)
• Equalization: Automatic, Approx. 100 feet at 1.5 Gb/s, Approx. 500 feet at 270 Mb/s
• Connectors: Three 75 Ohm BNC's, One Power Off Bypassed
• Standard: Same as input
• Signal Level: 800 mV, Nominal
• DC Offset: +/- 0.5 V
• Rise Time: 200 ps, Nominal
• Overshoot: < 10%
• Timing Jitter: < 1.0 U
• Wideband Jitter: < 0.2 UI
• General Purpose Interface (GPI): One Open/Closed Dry Contact
• Serial Ports: Two RS-232 DE-9 One Male and One Female
• Ethernet: One, 8P8C modular connector, IEEE
• External Modem(s): Optional
• Temperature: 0° to 50° C ambient
• Humidity: 10% to 90% non-condensing
• Input: Auto Detection 100 to 240 VAC at 50/60 Hz
• Output: 5 VDC up to 3.2 A
• Compliance: UL Approved
• Dual Supplies: Optional
• Weight: 4 lbs