Products

Product Description

MODEL- E-100BTX-FX-05SC VENDOR- TRANSITION NETWORKS FEATURES- Fast Ethernet Stand-Alone Media Converter 100BaseTX to 100BaseFX MM (SC)[2 km]. Used in pairs this media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber or up to 120 km over single mode fiber. Using one media converter a switch with a copper port can be connected to a switch with an existing fiber interface. * Operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. * Round trip delay of only 40 bit times--far below the Class II rating of 92 bit times. * Auto-Negotiation (802.3u) Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link. * AutoCross Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration. * Link Pass Through Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal. * Far End Fault (FEF) A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link. * Automatic Link Restoration Transition Networks s converters will automatically re-establish link in all network conditions. * Pause (IEEE 802.3xy) Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. * The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers converters the user must intervene to re-establish link. -- SPECIFICATIONs ----------------------------------CONNECTORS - (1) 100BaseTX (RJ-45) [100 m/328 ft.] (1) 100BaseFX 1300nm multimode (SC) [2 km/1.2 miles]STANDARDS - IEEE Std. 802.3 100BASE-FX 100BASE-TX FIBER OPTIC CONNECTOR- Multi mode Min TX PWR : -19.0 dBm Max TX PWR : -14.0 dBm RX Sensitivity: -31.0 dBm Max In PWR : -14.0 dBm Link Budget : 12.0 dB INDICATORS - LEDs for Power Fiber Link Fiber Receive Copper Receive and Copper Link.APPROVALS - UL listed and CSA certified FCC Class A CISPR/EN55022 Class A EN55024 EN61000 CE Mark.POWER - External AC/DC required: 12 VDC 0.5 A unregulated standard.DIMENSIONS - 3.0"w x 1.0"h x 4.7"dMANUFACTURER WARRANTY:  1 YEAR