Products

Product Description

Features:

• 3.25 in. Voice Coil
• 2000 Watts Peak Power Handling
• Ferrite Magnetics
• Precision Circular Wire Geometry
• Die Cast Aluminum Chassis

The P Audio C12-2000CAis a high performance wide bandwidth transducer. The C12-2000CA is an upgraded design that features many of P Audio’s new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C12-2000CA has been optimized for use in two way or three way sound reinforcement systems.

The transducer is also ideal as a low frequency driver for ultra high performance system designs and has an operating bandwidth of 50Hz to 3000Hz.The C12-2000CA features a very large 3.25 inch (82.5mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The C12-2000CA utilizes P Audio’s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P Audio’s inside/ outside precision wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling.The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

• Nominal diameter - 305 mm/12 in
• Power rating - 500 Watts(aes)
• Nominal impedance - 8 ohms
• Sensitivity - 97 dB
• Frequency range - 50-3000 Hz
• Chassis type - Cast aluminum
• Magnet type - Ferrite
• Magnet weight - 2.9 kg/103.9 oz
• Voice coil diameter - 82.5 mm/3.25 in
• Coil material - CCA-W
• Former material - Glass fiber
• Cone material - Paper
• Surround material - Cloth
• Suspension - Single
• X-max - 4.8 mm/0.19 in
• Gap depth - 10 mm/0.39 in
• Voice coil winding width 19.6 mm/0.77 in
• Net Weight - 9.4 kg/20.7 lb
• Packing Dimension WxDxH 355 x 355 x 205 mm

• Re - 5.5 Q
• Fs - 58 Hz
• Mms - 53.09 g/1.87 oz
• Mmd - 46.05 g/1.62 oz
• Qms - 6.65
• Qes - 0.37
• Qts - 0.35
• Vas - 56.03 lt/1.98 ft
• Bl - 17.03 Tm
• Cms - 1.4e-04 m/N
• Rms - 2.93 Ns/m
• Le (at 1kHz) - 0.49 mH