Products

Product Description

The RB-HD2 is a high performance 2-way stereo headphone distribution amplifier for driving up to 2 pairs of professional stereo headphones from a single stereo or mono input. A switch on the rear panel enables the distribution of a mono signal to all four outputs (i.e. both earpieces of a pair of stereo headphones) via the left channel input. The stereo/mono switch is located on the rear panel to prevent accidental knocking.

• Output Level: Drives 150mW into 32Ω to 600Ω headphones
• Max Input Level: +28dBu
• Input impedance: >20kΩ balanced bridging (main)
• Input Gain Range: -12dB to +20dB gain (pre-set pots)
• Volume Controls: -80dB to +11dB gain
• Outputs: 2 x 1/4" (6.35mm) A-gauge 3-pole stereo jack sockets
• Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)
• Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max
• IMain Stereo Inputs: 2 x XLR 3 pin female (balanced, can be unbalanced)