Products

Product Description

The RB-PMX4 is a high performance 10 mono input to 4 mono output pre-set mixer. Each of the four outputs has a 10 way DIP switch associated with it to select which of the 10 inputs are routed to it. So, by altering the DIP switches, any of the input sources can be mixed to any of the outputs. The DIP switches are enclosed by a screw-on cover on the front panel so that the settings can not be accidentally changed for secure applications.

• Input Impedance: >20k Ohm balanced bridging
• Noise: -86dBu RMS 22Hz-22kHz unity gain, ref +8dBu
• Frequency Response: 20Hz to 20kHz ±0.1dBu (600O load, @ 1kHz)
• Maximum Output Level: +28dBu
• Maximum Input Level: +36dBu
• Common Mode Rejection: >60dBu typically
• Output Impedance: <50 Ohm
• Gain Range: Adjustable -8dBu to +18dBu gain
• Distortion: <0.01% @ 1kHz, 0dBu to +26dBu
• Inputs: 10 x XLR 3 pin female (Balanced, can be unbalanced)
• Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W maximum
• Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)
• Outputs: 4 x XLR 3 pin male (Balanced, can be unbalanced)
• Off-isolation/Crosstalk: >90dBu @ 1kHz