Products

Product Description

The IPQ1000 is a handheld MPEG transport stream analyzer focused on making video over IP more intuitive and easier to diagnose. Quick touchscreen selection of source data from ASI or IP can be decoded and displayed on the LCD screen. Bandwidth is measured by PID, program, and stream. The IPQ1000 contains a comprehensive alarm engine based on the ETSI TR-101-290 and ATSC-A/78 standards. An MPEG2 decoder and an optional Dolby D decoder provide audio and video to the internal LCD touchscreen and speakers for quick verification of your audio / video source. Dual Ethernet ports for video over IP allows the device to be inserted in line with a suspected problem device. The IPQ1000 will identify all IP traffic by source IP address, destination IP address and destination port number. Sources Tab - The Source Display lists all sources discovered by the IPQ1000. When selected, the source will be highlighted as seen here. The bandwidth for the interface (ASI or IP) can be seen at the bottom of the screen. Each source represents a separate transport stream that can be evaluated in the following tabs.

• Alarms on all streams simultaneously can monitor both ASI and IP streams at the same time
• Auto discovery of all transport streams on both ASI and IP interfaces (no specific IP setup necessary)
• The device utilizes a 5" touch screen for its graphical interface to make setup and configuration more recognizable to video professionals
• MPEG2 / H.264 Video decoder to verify contents on the LCD screen
• Unique hardware accelerated design allows for multi-stream alarm evaluation ATSC A/78 and ETSI TR-101-290
• Internal rechargeable battery provides a runtime of over 5 hours under typical use
• Updatable via the USB port
• NTP client to determine STT accuracy
• CEA-608 CEA-708 Closed Captioning
• Includes Internal Hard Drive and Carry Case
• Port Control Push Buttons, Hotkeys, OSD

• IPQ-1000 Handheld Unit
• Internal Hard Drive
• Carry Case

• Weight: 1.2 lbs