Products

Product Description

The D SERIES-TPSM2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The TPSM2A models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPSM2A features a white front-panel laminate with gray lettering that matches RDL Decorac-style remote controls. The dB-TPSM2A features a black front-panel laminate. The DS-TPSM2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.

• Two Balanced Microphone XLR Inputs with P48 Phantom
• Switch-Selectable Mic Gain on Rear Panel
• Gain Selector Provides Fixed 40 dB, 60 dB or Automatic
• Studio-Quality Precision Active Balanced Circuitry
• Output Pair Selector to Feed RJ45 Pair (A, B or C) for Each Preamplifier
• Signal and Power Pairs Pass Through RJ45 Connectors
• Module is Remotely Powered Through RJ45 Connector
• Utilizes Two Format-A Pairs
• Daisy-Chain with a Single-Pair Format-A Sender

• Inputs (2): XLR (3 pin, 1=GND, 2+, 3-)
• Gain (fixed): 40 dB - LOW gain, 60 dB - HIGH gain
• Gain (AUTO): 40 dB for condenser mics, 60 dB for dynamic mics
• Maximum Input Level: >-18 dBu (LOW gain), >-35 dBu (HIGH gain)
• Input Impedance: > 1 k balanced
• Phantom Power: 48 (48 V per IEC 61938: 2013)
• Output: RDL TP Format A
• Format-A Signal Pair Used: Switch-selectable A, B, or C
• Headroom (above +4 dBu output): >18 dB
• Gain Selectors (2): LOW, HIGH or AUTO (rear panel; one for each preamplifier)
• Frequency Response: 20 Hz to 20 kHz (+/- 0.5 dB)
• CMRR: > 80 dB (20 Hz to 5 kHz)
• Power Requirement: 24 Vdc @ 80 mA (120 mA with phantom), Ground-referenced
• Automatic Gain: 60 dB for Dynamic Mics; 40 dB for Condenser Mics
• Color: White
• Weight: 1 lbs