Products

Product Description

Migrate to Gigabit Ethernet in a -effective manner. Used in conjunction with lower 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet swithout all of the higher s. Transition Networks 1000BASE-T to SX/LX converters allow users to extend the bandwidth to those users outside the reach of the 1000BASE-T standard (up to 125 km).

• Gigabit Ethernet Media Converter
• Auto-Negotiation (802.3u) (Copper & Fiber)
• Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link
• Transparent Link Pass Through
• Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port thus notifying the end device while maintaining the fiber link between the two converters
• Automatic Link Restoration
• Transition Networks's converters will automatically re-establish link in all network conditions
• Pause (IEEE 802.3xy)
• Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed
• Local end-device will be notified of remote fiber RX loss

• Standards: IEEE Std. 802.3ab and IEEE Std. 802.3z
• Multimode Min TX PWR: -10.0 dBm
• Max TX PWR: -4.0 dBm
• RX Sensitivity: -17.0 dBm
• Max In PWR: 0.0 dBm
• Link Budget: 7.00 dB
• 6-position Switch SW1: Remote Fiber Fault Detect (Down=Enabled)
• SW2: Symmetric Pause
• SW3: Asymmetric Pause
• SW4: Transparent Link Pass Through (UP=Enabled)
• SW5: Fiber Auto-Negotiation (Down=Enabled)
• SW6: Loopback (Down=Enabled)
• Status LEDs PWR (Power): Steady green LED indicates connection to external AC power
• RXF (Fiber receive): Flashing LED indicates reception of data on fiber link
• LKF (Fiber link): Steady LED indicates fiber link connection
• RXC (Copper receive): Flashing LED indicates reception of data on copper link
• LKC (Copper link): Steady LED indicates copper link connection
• Power External AC/DC required: 12V DC, 1.5A; unregulated; standard
• Environment 0 50° C operating: 5% 95% humidity non-condensing; 0 10,000 feet altitude
• Safety Compliance Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
• Dimensions : 3.25" x 4.8" x 1.0"
• Weight: 2 lbs