Products

Product Description

The VIP200 series allows point to point, point to many, many to point, and many to many configurations. The VIP200 series is set to work out of the box as a point to point system,no configuration is necessary, simply plug them together using CAT5e or better cable. The VIP200 series can work out of the box this way because it employs its own Auto IP addressing method. If you are using the VIP200 series through a network switch, you will need to determine if the switch is using DHCP or assigned IP addressing methods. In either of these cases, you would then need to configure the VIP200 devices to DHCP or Manual IP addressing methods. The VIP200 series provides three modes of addressing.

• Ultra-low latency
• High Quality proprietary codec
• USB 2.0 (KVM)
• RS232 and IR
• Handheld remote control for 'channel' like switching
• VPX IP Video Management Software with browser interface
• HDCP compliance
• HDMI, DVI, and VGA transmitter and receiver options

• 1x Power Adapter, 1x Infrared Receiver

• Support Resolution: Up to 1920 x 1200
• Audio Connector: 1 x 3.5 mm Phone Jack
• Weight: 1.01 lbs