Products

Product Description

The Guest Pod II can be used with a MultiPhones Master unit or by itself as a stand-alone headphone listening station. In either case, multiple Guest Pods can be linked using cat5 cabling to produce a multi-user headphone listening system. The front panel of the Guest Pod II includes a volume control, both 1/4" and 3.5mm headphone jacks, and two user-assignable illuminated pushbuttons. These buttons are typically used for talent Cough (mic mute) and Talkback functions.

When Guest Pods are used with a MultiPhones Master unit, audio and power are supplied by the Master. Each Guest Pod has two RJ45 I/O jacks so that multiple units can be "daisy chained" together. Up to 12 Guest Pods can be supported by one MultiPhones Master unit.

For stand-alone use, stereo audio is fed to the two 1/4" Input jacks, and a 9-12 volt AC power source is connected to the Power jack. Multiple Guest Pods canbe "daisy chained" together using cat5 cabling so that audio and power are distributed to all units. Another installation option is to use cat5 cabling to distribute power (only) and feed a separate audio signal to each Guest Pod.

• MultiPhones II or Standalone

• Audio Input, RJ45: From MultiPhones Master
• Audio Input, TRS: 0 dBu nom, stereo, 10K balanced
• Frequency Response: 5Hz - 20 kHz, +/- 0.25 dB
• Distortion: 005% typical
• Output: 24 - 600 ohm Headphones
• Power Requirement: MultiPhones Master or 9-12VAC, 50ma
• Weight: 1 lbs