Products

Product Description

Pool Solutions Stabilizer is made with Cyan uric Acid content that helps protect the Chlorine in your pool water from dissipation caused by direct sunlight. It reduces the loss and lets Chlorine stay in your swimming pool longer, thus saving you time and money. You can use this if intense sunlight causes difficulty in maintaining Chlorine residual.

• 10,000 Gallons - Add 1 Lb to raise 10 ppm.
• 20,000 Gallons - Add 2 Lb to raise 10 ppm.
• 40,000 Gallons - Add 4 Lb to raise 10 ppm.

• Clean and backwash the filter.
• Adjust chlorine level to 1-3 ppm with a shock treatment.
• Measure the stabilizer (cyan uric acid) concentration with an appropriate test kit. The ideal range is 20-25 ppm. Do not exceed 100 ppm as chlorine effectiveness will be reduced.
• Determine dosage of stabilizer from the above table.
• With circulation pump on, add stabilizer to the skimmer. Leave the circulation pump running for 48 hours.
• Check the stabilizer level at least twice each year and add as needed.

• 7 lbs Container.
• Active Ingredients - 100 Percent Cyan uric Acid.
• Product Use - Helps prevent chlorine loss due to intense sunlight.
• Reduces Chlorine Loss by 25 Percent.